$3,399.00 Inc. GST

  • Installation DSP amplifier, Euroblock connectors
  • Fully integrated professional speaker processing with FIR Drive technology
  • Market leading acoustic performance and rock solid reliability
  • Low Z and 70/100V operation and power saving standby mode
  • Intuitive system control software, makes setup and control easy


Load Impedance 2Ω 2.7Ω 4Ω 8Ω
Maximum Output Power, SIngle Channel 2Ω: 3200W; 2.7Ω: 2700W; 4Ω: 1800W; 8Ω: 950W
Maximum Output Power, Dual Channel 2Ω=3000W; 2.7Ω=2500W; 4Ω=1700W; 8Ω=900W;
Maximum Output Power, Bridged 4Ω=6000 W; 8Ω=3400 W
Maximum RMS Voltage Swing, THD = 1%, 1kHz 90.6V
Voltage Gain ref.1kHz 32.0dB
IMD-SMPTE, 60 Hz, 7 kHz <0.1%
DIM 30 <0.05% (3.15 kHz, 15 kHz)
Maximum Input Level +21 dBu
Crosstalk < -80dB (ref. 1 kHz, at 100 W/4 Ω)
Frequency Response 10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced 20kΩ
Signal-to-Noise Ratio (A-weighted) >109dB
Output Noise , A-weighted <-68dBu
Output Stage Topology Class H
Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption 850 W (Ω Maximum Output Power @4Ω)
Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling Front-to-rear, 3-stage-fans
Safety Class I
Available Color Black
Height 3.46″ (88mm)
Width 19.02″ (483mm)
Depth 18.2″ (462.4mm)
Weight Net 40.12lbs (18.2kg)
Signal Processing FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance
High Impedance Operation 70V Operation & 100V Operation
Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH
Operating Temperature Range +5°C to +40°C (40°F to +105°F)
Total Harmonic Distortion <0.05% (at 1200 W/4 Ω MBW = 80 kHz, 1 kHz)

Additional information

Weight 16 kg