Dynacord C1300FDI DSP POWER AMPLIFIER
- Installation DSP amplifier, Euroblock connectors
- Fully integrated professional speaker processing with FIR Drive technology
- Market leading acoustic performance and rock solid reliability
- Low Z and 70/100V operation and power saving standby mode
- Intuitive system control software, makes setup and control easy
Description
| Load Impedance | 2? 2.6? 4? 8? |
| Maximum Output Power, SIngle Channel | 2?:1100W; 2.6?: 950W; 4?: 660W; 8?: 350W |
| Maximum Output Power, Dual Channel | 2?:1000W; 2.6?: 850W; 4?: 600W; 8?: 320W |
SPECIFICATIONS |
|
| Maximum Output Power, Bridged | 4?=2000W; 8?=1200W; |
| Maximum RMS Voltage Swing, THD = 1%, 1kHz | 55.3V |
| Voltage Gain ref.1kHz | 32.0dB |
| IMD-SMPTE, 60 Hz, 7 kHz | < 0.1% |
| DIM 30 | < 0.05% (3.15 kHz, 15 kHz) |
| Maximum Input Level | +21 dBu |
| Crosstalk | < -80dB (ref. 1 kHz, at 100 W/4 ?) |
| Frequency Response | 10 Hz to 21 kHz (±1 dB) |
| Input Impedance, active balanced | 20k? |
| Signal-to-Noise Ratio (A-weighted) | >104dB |
| Output Noise , A-weighted | < -68dBu |
| Output Stage Topology | Class AB |
| Power Requirement | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) |
| Power Consumption | 550 W (? Maximum Output Power @4?) |
| Protection | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay |
| Cooling | Front-to-rear, 3-stage-fans |
| Safety Class | I |
| Available Color | Black |
| Height | 3.46″ (88mm) |
| Width | 19.02″ (483mm) |
| Depth | 18.2″ (462.4mm) |
| Weight Net | 28.44lbs (12.9kg) |
| Signal Processing | FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance |
| High Impedance Operation | 70 V Operation; 100 V Operation |
| Mains Fuse | 240 V/230 V: T10AH; 120 V/100 V: T20AH |
| Operating Temperature Range | +5°C to +40°C (40°F to +105°F) |
| Total Harmonic Distortion | < 0.05% (at 450 W/4 ? MBW = 80 kHz, 1 kHz) |
