Dynacord C1800FDI DSP POWER AMPLIFIER
- Installation DSP amplifier, Euroblock connectors
- Fully integrated professional speaker processing with FIR Drive technology
- Market leading acoustic performance and rock solid reliability
- Low Z and 70/100V operation and power saving standby mode
- Intuitive system control software, makes setup and control easy
Description
Load Impedance | 2Ω 2.6Ω 4Ω 8Ω |
Maximum Output Power, SIngle Channel | 2Ω:1600W; 2.6Ω: 1300W; 4Ω: 950W 8Ω: 480W |
Maximum Output Power, Dual Channel | 2Ω=1400W; 2.6Ω=1200W; 4Ω=850W; 8Ω=450W; |
SPECIFICATIONS |
Maximum Output Power, Bridged | 4Ω=2800W; 8Ω=1700W; |
Maximum RMS Voltage Swing, THD = 1%, 1kHz | 65.1V |
Voltage Gain ref.1kHz | 32.0dB |
IMD-SMPTE, 60 Hz, 7 kHz | <0.1% |
DIM 30 | <0.05% (3.15 kHz, 15 kHz) |
Maximum Input Level | +21dBu |
Crosstalk | < -80dB (ref. 1 kHz, at 100 W/4 Ω) |
Frequency Response | 10 Hz to 21 kHz (±1 dB) |
Input Impedance, active balanced | 20kΩ |
Signal-to-Noise Ratio (A-weighted) | >105dB |
Output Noise , A-weighted | <-68dBu |
Output Stage Topology | Class AB |
Power Requirement | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) |
Power Consumption | 700W (Ω Maximum Output Power @4Ω) |
Protection | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay |
Cooling | Front-to-rear, 3-stage-fans |
Safety Class | I |
Available Color | Black |
Height | 3.46″ (88mm) |
Width | 19.02″ (483mm) |
Depth | 18.2″ (462.4mm) |
Weight Net | 33.51lbs (15.2kg) |
Signal Processing | FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance |
Mains Fuse | 240 V/230 V: T10AH; 120 V/100 V: T20AH |
Operating Temperature Range | +5°C to +40°C (40°F to +105°F) |
Remote Power ON/GPIO | Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection |
Total Harmonic Distortion | <0.05% (at 600 W/4 Ω MBW = 80 kHz, 1 kHz) |