Dynacord C2800FDI DSP POWER AMPLIFIER

$2,829.00 Inc. GST

  • Installation DSP amplifier, Euroblock connectors
  • Fully integrated professional speaker processing with FIR Drive technology
  • Market leading acoustic performance and rock solid reliability
  • Low Z and 70/100V operation and power saving standby mode
  • Intuitive system control software, makes setup and control easy

Description

Load Impedance 2Ω 2.7Ω 4Ω 8Ω
Maximum Output Power, SIngle Channel 2Ω: 2300W; 2.7Ω: 2000W; 4Ω: 1400W; 8Ω: 700W;
Maximum Output Power, Dual Channel 2Ω=2200W; 2.7Ω=1800W; 4Ω=1300W; 8Ω=650W;
SPECIFICATIONS
Maximum Output Power, Bridged 4Ω=4400W; 8Ω=2600W;
Maximum RMS Voltage Swing, THD = 1%, 1kHz 78.8V
Voltage Gain ref.1kHz 32.0dB
IMD-SMPTE, 60 Hz, 7 kHz <0.1%
DIM 30 <0.05%% (3.15 kHz, 15 kHz)
Maximum Input Level +21dBu
Crosstalk < -80dB (ref. 1 kHz, at 100 W/4 Ω)
Frequency Response 10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced 20kΩ
Signal-to-Noise Ratio (A-weighted) >107dB
Output Noise , A-weighted <-68dBu
Output Stage Topology Class H
Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption 700W (Ω Maximum Output Power @4Ω)
Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling Front-to-rear, 3-stage-fans
Safety Class I
Available Color Black
Height 3.46″ (88mm)
Width 19.02″ (483mm)
Depth 18.2″ (462.4mm)
Weight Net 35.71lbs (16.2kg)
Signal Processing FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance
Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH
Operating Temperature Range +5°C to +40°C (40°F to +105°F)
Remote Power ON/GPIO Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Total Harmonic Distortion < 0.05% (at 900 W/4 Ω MBW = 80 kHz, 1 kHz)