Dynacord L1800FD DSP POWER AMPLIFIER 2X950W

$1,769.00 Inc. GST

  • Live performance DSP amplifier
  • Fully integrated professional speaker processing with FIR Drive technology
  • Market leading acoustic performance and rock solid reliability
  • True 2 ohm stability
  • Intuitive system control software, makes setup and control easy

Description

Load Impedance 2Ω 2.6Ω 4Ω 8Ω
Maximum Output Power, SIngle Channel 2Ω: 1600W; 2.6Ω: 1300W; 4Ω: 950W; 8Ω: 480W
Maximum Output Power, Dual Channel 2Ω: 1400W; 2.6Ω: 1200W; 4Ω: 850W; 8Ω: 450W
Maximum Output Power, Bridged 4Ω: 2800W; 8Ω: 1700W
Maximum RMS Voltage Swing, THD = 1%, 1kHz 65.1V
Voltage Gain ref.1kHz 32.0dB
IMD-SMPTE, 60 Hz, 7 kHz <0.1%
DIM 30 <0.05% (3.15 kHz, 15 kHz)
Maximum Input Level +21dBu
Crosstalk < -80dB (ref. 1 kHz, at 100 W/4 Ω)
Frequency Response 10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced 20kΩ
Signal-to-Noise Ratio (A-weighted) >105dB
Output Noise , A-weighted <-68dBu
Output Stage Topology Class AB
Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption 700W (Ω Maximum Output Power @4Ω)
Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling Front-to-rear, 3-stage-fans
Safety Class I
Available Color Black
Height 88mm (3.46″)
Width 483mm (19.02″)
Depth 462.4mm (18.2″)
Weight Net 15.2kg (33.51 lbs)
Signal Processing FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance
Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH
Operating Temperature Range +5°C to +40°C (40°F to +105°F)
Total Harmonic Distortion <0.05% (600 W/4 Ω MBW = 80 kHz, 1 kHz)